FRIENDSHIP MACHINERY CO,LTD
FRIENDSHIP MACHINERY CO,LTD
Add to Cart
PHJ-15 H beam 3 in 1 welding machine
1. Introduction
H beam combination work station is the special equipment for the H beam steel production, mainly used for H beam assembling, welding and straightening. It centralizes the function of the assembling machine, welding machine and straightening machine on one combination machine. It can save the time during work-piece transport and space of the work place, also can improve the annual output of unit-area. PHJ type H beam combination work station is new type equipment with high efficiency in the process of H beam production.
2. technical parameters
● H beam web height: 200-1500mm
● H beam web thickness: 6-30mm
● H beam flange width: 200-800mm
● H beam flange thickness: 6-40mm
● H beam length: 4000-15000mm
● H beam material: Q235 (tensile strength ≤235MPa)
● Tapered H beam: less than 8° is acceptable
● Welding joints height: 4-8mm
● Welding wire diameter: 2.5mm or 3.0mm
● Welding speed adjustable range: 0.2-1.2m/min
● Input conveyor: 1 set power conveyor, 2 sets idler conveyor
● Output conveyor: 2 sets lifting conveyor, 1 set idler conveyor
● Pull-rod system: 1 set power type and 1 set idler type, 2 pieces of pulling bar
● Submerged arc welder: Huayuan MZ1000 or Lincoln DC1000
| ● H beam web height | 200-1500mm |
| ● H beam web thickness | 6-30mm |
| ● H beam flange width | 200-800mm |
| ● H beam flange thickness | 6-40mm |
| ● H beam length | 4000-15000mm |
| ● H beam material | Q235 (tensile strength ≤235MPa) |
| ● Tapered H beam | less than 8° is acceptable |
| ● Welding joints height | 4-8mm |
| ● Welding wire diameter | 2.5mm or 3.0mm |
| ● Welding speed adjustable range | 0.2-1.2m/min |
